VAASA (Thailand) Limited: 2010-07

2010-07-23

EC5500R Ohkura DIGITAL CONTROLLER

Ohkura EC5500R Digital Controller

FEATURES
• Extra-Large digital display
• Auto-Tuning, Self-Tuning provided as standard
• Full Multi-Input Thermocouple, RTD, voltage or current
• Scaling Range of -1999 to 9999
• Multi- Output (Selective)
• 4 Alarm Output
• RS-232C,RS- 422A (RS-485) Communication Interface
• Easy Replace from EC5500S

OUTLINE

EC5500R Digital Indicating Controller has a large-sized display excellent in visibility. Since it is a light guide system, it is clear also outdoors. And dial setting is fulfilled easy operation.
In addition, self-tuning is equipped as a standardly. PID, gapped PID, heat/cool control or servo PID are available as control functions. As described above, the EC5500R 1/4DIN controller is applicable to a broad use.

SPECIFICATIONS
Input range: Full multi-range, refer to Range table
Display: 7-segment LED, process variable(PV) / green, set point(SP)& output/ orange
Sampling Rate:250ms
Scaling: -1999 to 9999 with mV, V & mA ranges
Set point: Front panel (local) or remote (optional)
Set point bias: ± 20% available with remote set point
Set point tracking: Remote to local
Set point limiter: 0~100% with TC & RTD input ranges
Multi set point: Up to 8 set points
Sensor correction: ± 100°C with TC & RTD input ranges
Set point ramping: 0.01 ~ 650.0 unit/min. Unit °C or %
Control: PID, gapped PID, PD, 3-position (dual output) or ON/OFF
Proportional band: 0.1~999.9%
Integral (reset): 0.01 ~99.99 min.
Derivative (rate): 0~20.00 min.
Manual reset: 0~100%, PD control mode only
Dead band: ± (0~0.500), heat/cool control mode
Hysteresis: 0.00~20.00% ,ON/OFF control mode
PlD adjustment: Independent on each set point
Programmed PID: 8 PID parameters can be selected automatically to optional remote set point
PID tuning: Selectable Auto tuning or Self tuning
Output: Selectable output from among
Relay; a-contact, 250VAC, 3A resistive load
SSR Drive; 15VDC, 20mA max.
Current; 4~20mA/600Ω or 0~5mA/2kΩ
Servo drive output: Option
Dual output: Any combination from among relay, SSR drive and current output
Auto/Manual: Balance less bump less transfer
Output limiter: 0~100%
Direct/Reverse: Selectable, reverse in Dual output model
Cycle time: 1~120 sec., relay and SSR drive output
RUN/STOP: Controller enable/disabled
Preset manual: 0~100%, available when controller disabled
Alarm: 4 set point process variable or deviation alarm Alarm set point: Process variable alarm, 0~100% of range, deviation alarm, ± 100% of range Hysteresis: 0~100% adjustable within the range
Alarm on delay timer: 0~600 sec.
Nos. of output relays: 4 relays, driven from among each alarm and controller status (2 relays are optional)
Relay rating: a-contact, 250VAC 0.5A, resistive load, One side contact are common.
Status Output: AUTO/MAN, RUN/STOP, Watchdog timer & Reach at set point (available on set point ramping)
Digital input: 4 input for set point selection, PID parameter selection, AUTO/MAN switching, Remote/Local switching, or RUN/STOP switching, Non-voltage contact input 15VDC 1mA
Memory backup: Non-volatile RAM (Fe-RAM)
Interface: 300~9600 bps, ZE7101A0110 and ZE7101B0408 allow direct connection of RS-232C and RS-422A (RS-485)to the controller respectively
Power Supply: Voltage rating at 100 to 240VAC,50/60Hz
Power consumption: Approx. 6VA/100VAC, 10VA/200VAC
Weight: Approx. 500g
Operating temperature range: -10 ~ 55°C

PERFORMANCE
Accuracy: ± (0.25% +1 digit) max., refer to Range Accuracy Table
Source impedance effects: Approx. 0.13µV/Ω at TC & mV ranges, RTD lead wire 5Ω max.
Input impedance: Approx.250Ω/4-20mA, Approx.500kΩ/Volt input
CMRR: 140dB min.
NMRR: 60dB min.

OPTION
Analog retransmission: 0 ~ 20mA or 4 ~ 20 mA selectable for process variable, set point or output, max.load 600Ω.
Accuracy: ± 0.25%, resolution 0.05%
Isolated remote set point: 1 ~ 5 VDC or 0 ~ 5VDC, Approx. 500kΩ input impedance
ARCNET : Token passing LAN, 2.5Mbps, 20 nodes/network, 255 nodes max.

DIMENSIONS
96x96x100 (Unit: mm)

PANEL CUTOUT
92+0.8x92+0.8 (Unit: mm)

TECHNICAL & SALES SUPPORT

CORPORATE ADDRESS

VAASA (THAILAND) LIMITED
39/117 Moo 11, Srinakarin Rd., Bangkrew, Bangplee, Samutprakarn 10540 THAILAND
Tel: 662 753 6994
Fax: 662 753 6996
Hot-Line: 6681 935 2355
Email: vaasa@truemail.co.th

http://vaasathailand.blogspot.com

DOWNLOAD PDF SPECIFICATION

©1991-2010 VAASA (THAILAND) LIMITED
39/117 Moo 11, Srinakarin Road, Bangkrew, Bangplee, Samutprakarn 10540 THAILAND
Phone: 662 753 6994 • Fax: 662 753 6996 • Hot-Line: 6681 935 2355

• Email : vaasa@truemail.co.th • www.vaasathailand.blogspot.com

OHKURA PRODUCT RANGE

RECORDER , HYBRID RECORDER

RM10C RECORDER

RM1001C0000 1 PEN HYBRID RECORDER

RM1001C1100 1 PEN HYBRID RECORDER

RM1001C1300 1 PEN HYBRID RECORDER

RM1002C0000 2 PENS HYBRID RECORDER

RM1002C1100 2 PENS HYBRID RECORDER

RM1002C1300 2 PENS HYBRID RECORDER

RM1006C0000 6 CHANNELS HYBRID RECORDER

RM1006C1100 6 CHANNELS HYBRID RECORDER

RM1006C1300 6 CHANNELS HYBRID RECORDER

RM1006C1310 6 CHANNELS HYBRID RECORDER

RM10C PH ORP RECORDER

RM1001C000P

RM1001C010P

RM1001C020P

RM1001C030P

RM1001C011P

RM1001C021P

RM1001C031P

RM10L RECORDER

RM1003L000 01A 00 3 PENS HYBRID RECORDER

RM1003L101 01A 00 3 PENS HYBRID RECORDER

RM1003L201 01A 00 3 PENS HYBRID RECORDER

RM1004L000 01A 00 4 PENS HYBRID RECORDER

RM1004L101 01A 00 4 PENS HYBRID RECORDER

RM1004L201 01A 00 4 PENS HYBRID RECORDER

RM10G RECORDER

RM1001G0001

RM1002G0001

RM1003G0001

RM1004G0001

RM1006G0001

RM1001G1111

RM1002G1111

RM1003G1111

RM1004G1111

RM1006G1111

RM1001G2111

RM1002G2111

RM1003G2111

RM1004G2111

RM1006G2111

RM1001G2211

RM1002G2211

RM1003G2211

RM1004G2211

RM1006G2211

RM10V VERTICAL RECORDER

RM1001V 1 PEN VERTICAL RECORDER

RM1002V 2 PENS VERTICAL RECORDER

RM1003V 3 PENS VERTICAL RECORDER

RM18L RECORDER

RM1801L00001 A 00

RM1802L00001 A 00

RM1803L00001 A 00

RM1804L00001 A 00

RM1806L00001 A 00

RM1812L00001 A 00

RM1824L00001 A 00

RM1830L00001 A 00

RM1801L10101 A 00

RM1802L10101 A 00

RM1803L10101 A 00

RM1804L10101 A 00

RM1806L10101 A 00

RM1812L10101 A 00

RM1824L10101 A 00

RM1830L10101 A 00

RM1801L10301 A 00

RM1802L10301 A 00

RM1803L10301 A 00

RM1804L10301 A 00

RM1806L10301 A 00

RM1812L10301 A 00

RM1824L10301 A 00

RM1830L10301 A 00

RM1801L20101 A 00

RM1802L20101 A 00

RM1803L20101 A 00

RM1804L20101 A 00

RM1806L20101 A 00

RM1812L20101 A 00

RM1824L20101 A 00

RM1830L20101 A 00

RM1801L20301 A 00

RM1802L20301 A 00

RM1803L20301 A 00

RM1804L20301 A 00

RM1806L20301 A 00

RM1812L20301 A 00

RM1824L20301 A 00

RM1830L20301 A 00

RM18G RECORDER

RM1801G00001 A 00

RM1802G00001 A 00

RM1803G00001 A 00

RM1804G00001 A 00

RM1806G00001 A 00

RM1812G00001 A 00

RM1824G00001 A 00

RM1830G00001 A 00

RM18N RECORDER

RM1801N00001 A 00

RM1802N00001 A 00

RM1803N00001 A 00

RM1804N00001 A 00

RM1806N00001 A 00

RM1812N00001 A 00

RM1824N00001 A 00

RM1830N00001 A 00

RM25G RECORDER

RM2506G 0 00 01A 00

RM2512G 0 00 01A 00

RM2524G 0 00 01A 00

RM2530G 0 00 01A 00

CONSUMABLE PARTS

HZCGA0105EL001 , WPSR196A000001A , WPSR196A000002A ,

HPSR001H0002C , WPSR188A000001A , HMSU3741A , HMSU3081A11

PAPERLESS RECORDER

VM7000 PAPERLESS RECORDER , VIDEO GRAPHIC RECORDER

VM7003A0 000

VM7006A0 000

VM7009A0 000

VM7012A0 000

VM7003A1 000

VM7006A1 000

VM7009A1 000

VM7012A1 000

VM7003A1 100

VM7006A1 100

VM7009A1 100

VM7003A1 200

VM7006A1 200

VM7009A1 200

PROCESS INDICATOR

DE7001B0 00

DE7001B0 10

DE7001B0 20

DE7001B0 30

DE7101B0 00

DE7101B0 10

DE7101B0 20

DE7101B0 30

PROCESS MONITORING AND CONTROL

MD6000

PROCESS CONTROLLER , TEMPERATURE CONTROLLER

EC4000C TEMPERATURE CONTROLLER

EC4100C TEMPERATURE CONTROLLER

EC5300R DIGITAL CONTROLLER , TEMPERATURE CONTROLLER

EC5301R 00000

EC5302R 00000

EC5305R 00000

EC5306R 00000

EC5308R 00000

EC5301R 10000

EC5302R 10000

EC5305R 10000

EC5306R 10000

EC5308R 10000

EC5301R 16010

EC5302R 16010

EC5305R 16010

EC5306R 16010

EC5308R 16010

EC5301R 16050

EC5302R 16050

EC5305R 16050

EC5306R 16050

EC5308R 16050

EC5500R DIGITAL CONTROLLER , TEMPERATURE CONTROLLER

EC5501R 00000

EC5502R 00000

EC5505R 00000

EC5506R 00000

EC5508R 00000

EC5501R 10000

EC5502R 10000

EC5505R 10000

EC5506R 10000

EC5508R 10000

EC5501R 16010

EC5502R 16010

EC5505R 16010

EC5506R 16010

EC5508R 16010

EC5501R 16050

EC5502R 16050

EC5505R 16050

EC5506R 16050

EC5508R 16050

EC5700R DIGITAL CONTROLLER , TEMPERATURE CONTROLLER

EC5701R 00000

EC5702R 00000

EC5705R 00000

EC5706R 00000

EC5708R 00000

EC5701R 10000

EC5702R 10000

EC5705R 10000

EC5706R 10000

EC5708R 10000

EC5701R 16010

EC5702R 16010

EC5705R 16010

EC5706R 16010

EC5708R 16010

EC5701R 16050

EC5702R 16050

EC5705R 16050

EC5706R 16050

EC5708R 16050

EC5800R DIGITAL CONTROLLER , TEMPERATURE CONTROLLER

EC5801R 00000

EC5802R 00000

EC5805R 00000

EC5806R 00000

EC5808R 00000

EC5801R 10000

EC5802R 10000

EC5805R 10000

EC5806R 10000

EC5808R 10000

EC5801R 16010

EC5802R 16010

EC5805R 16010

EC5806R 16010

EC5808R 16010

EC5801R 16050

EC5802R 16050

EC5805R 16050

EC5806R 16050

EC5808R 16050

PROGRAM CONTROLLER

EC1200A PROGRAM CONTROLLER

EC5610S PROGRAM CONTROLLER

EC5611S 100 00

EC5612S 100 00

EC5615S 100 00

EC5616S 100 00

EC5618S 100 00

EC5621S 100 00

EC5622S 100 00

EC5625S 100 00

EC5626S 100 00

EC5628S 100 00

EC5611S 183 10

EC5612S 183 10

EC5615S 183 10

EC5616S 183 10

EC5618S 183 10

EC5621S 183 10

EC5622S 183 10

EC5625S 183 10

EC5626S 183 10

EC5628S 183 10

EC5910S PROGRAM CONTROLLER

EC5911S 100 00

EC5912S 100 00

EC5915S 100 00

EC5916S 100 00

EC5918S 100 00

EC5921S 100 00

EC5922S 100 00

EC5925S 100 00

EC5926S 100 00

EC5928S 100 00

EC5911S 183 10

EC5912S 183 10

EC5915S 183 10

EC5916S 183 10

EC5918S 183 10

EC5921S 183 10

EC5922S 183 10

EC5925S 183 10

EC5926S 183 10

EC5928S 183 10

TYRISTOR UNIT

GS2020A

GS3000R

HEATER MONITORING UNIT

ZE7201

DS1101A

WATER POLLUTION MONITORING

SH5800R PH ANALYZER

SH5801R 0000

SH5802R 0000

SH5803R 0000

SH5801R 1000

SH5802R 1000

SH5803R 1000

SH5801R 2000

SH5802R 2000

SH5803R 2000

SH5801R 1111

SH5802R 1111

SH5803R 1111

SH5801R 2111

SH5802R 2111

SH5803R 2111

SH7300A PH TRANSITTER

SH7301A 000 N0

SH7302A 000 N0

SH7303A 000 N0

SH7301A 110 A0

SH7302A 110 A0

SH7303A 110 A0

SH7301A 110 B0

SH7302A 110 B0

SH7303A 110 B0

SH7301A 110 C0

SH7302A 110 C0

SH7303A 110 C0

RM10C pH ORP RECORDER

pH AND ORP PROBE

SP3101A FLOW THROUGH TYPE pH PROBE

SP3201A SUBMERSION TYPE pH PROBE

SP3201B SUBMERSION TYPE pH PROBE

SP3301A IMMERSION TYPE pH PROBE

SP3311A IMMERSION TYPE pH PROBE

SC5801R CONDUCTIVITY ANALYZER

SC5801R hh ll 0 0000

SC5801R hh ll 2 0000

SC5801R hh ll 3 0000

SC5802R RESISTIVITY ANALYZER

SC5802R hh ll 0 0000

SC5802R hh ll 2 0000

SC5802R hh ll 3 0000

SC7300A CONDUCTIVITY TRANSMITTER

SC7301A F hh 0 NN

SC7301A S hh 0 NN

SC7301A V hh 0 NN

SC7301A N hh 0 NN

SC7301A D hh 0 NN

SC7301A F hh 0 AN

SC7301A S hh 0 AN

SC7301A V hh 0 AN

SC7301A N hh 0 AN

SC7301A D hh 0 AN

SC7301A F hh 0 BN

SC7301A S hh 0 BN

SC7301A V hh 0 BN

SC7301A N hh 0 BN

SC7301A D hh 0 BN

SC7301A F hh 0 DN

SC7301A S hh 0 DN

SC7301A V hh 0 DN

SC7301A N hh 0 DN

SC7301A D hh 0 DN

SC7302A F hh 0 NN

SC7302A S hh 0 NN

SC7302A V hh 0 NN

SC7302A N hh 0 NN

SC7302A D hh 0 NN

SC7302A F hh 0 AN

SC7302A S hh 0 AN

SC7302A V hh 0 AN

SC7302A N hh 0 AN

SC7302A D hh 0 AN

SC7302A F hh 0 BN

SC7302A S hh 0 BN

SC7302A V hh 0 BN

SC7302A N hh 0 BN

SC7302A D hh 0 BN

SC7302A F hh 0 DN

SC7302A S hh 0 DN

SC7302A V hh 0 DN

SC7302A N hh 0 DN

SC7302A D hh 0 DN

CI10 CONDUCTIVITY CELL

CI355 CONDUCTIVITY CELL

OM3100A COULOMETER

PRESSURE TRANSMITTER

PT3000R

PT7000A PRESSURE TRANSMITTER

PT7011A ZZ A 1 0

PT7011A ZZ G 1 0

PT7011A ZZ A 2 0

PT7011A ZZ G 2 0

WATER LEVEL TRANSMITTER

LT3000A

LT7000A

MASS FLOW CONTROLLER

MF1100A MASS FLOW CONTROLLER

MF1121A

MF1141A

MF1151A

MF1171A

MF1181A

MF1191A

MF5100A MASS FLOW CONTROLLER

MF5111A

MF5141A

MF5151A

MF5112A

MF5142A

MF5152A

MF5113A

MF5143A

CF VALVES

MV VALVES

CONVERTER / DISTRIBUTOR

FX4000A

SE7101A

GAS MONITORING / ELECTROMETER

RD1220A RADIOACTIVE GAS MONITORING

RD5210A DIGITAL ELECTROMETER

PROCESS CONTROL SYSTEM / FACTORY AUTOMATION

FA3100A DUPLEX BLOCK COMPUTER

FA2200 OPERATION TERMINAL

EC1105 CONTROLLER

SEMICONDUCTOR EQUIPMENT

HORIZONTAL THERMAL FURNACE

VERTICAL THERMAL FURNACE

GAS METERING UNIT

DIGITAL PROFILE

TELEMETERING AND CONTROL SYSTEM

TRANSEDUCER

COMPACT TELEMETER

EC5300R Ohkura Digital Controller

Ohkura EC5300R Digital Controller
FEATURES
• Extra-Large digital display
• Auto-Tuning, Self-Tuning provided as standard
• Full Multi-Input Thermocouple, RTD, voltage or current
• Scaling Range of -1999 to 9999
• Multi- Output (Selective)
• 4 Alarm Output
• RS-232C,RS- 422A (RS-485) Communication Interface
• Easy Replace from EC5300S
OUTLINE
EC5300R Digital Indicating Controller has a large-sized display excellent in visibility.
Since it is a light guide system, it is clear also outdoors. And dial setting is fulfilled easy operation. In addition, self-tuning is equipped standard. PID, gapped PID, heat/cool control or servo PID are available as control functions. As described above, the EC5300R 1/8DIN controller is applicable to a broad use.

SPECIFICATIONS
Input range: Full multi-range, refer to Range table
Display: 7-segment LED, process variable(PV) / green, set point(SP)& output/ orange
Sampling Rate: 250ms
Scaling: -1999 to 9999 with mV, V & mA ranges
Set point: Front panel (local) or remote (optional)
Set point bias: ± 20% available with remote set point
Set point tracking: Remote to local
Set point limiter: 0~100% with TC & RTD input ranges
Multi set point: Up to 8 set points
Sensor correction: ± 100°C with TC & RTD input ranges
Set point ramping: 0.01 ~ 650.0 unit/min. Unit °C or %
Control: PID, gapped PID, PD, 3-position (dual output) or ON/OFF
Proportional band: 0.1~999.9%
Integral (reset): 0.01 ~99.99 min.
Derivative :(rate): 0~20.00 min.
Manual reset: 0~100%, PD control mode only
Dead band: ± (0~0.500), heat/cool control mode
Hysteresis: 0.00~20.00% ,ON/OFF control mode
PlD adjustment: Independent on each set point
Programmed PID: 8 PID parameters can be selected automatically to optional remote set point
PID tuning: Selectable Auto tuning or Self tuning
Output: Selectable output from among
Relay; a-contact, 250VAC, 3A resistive load
SSR Drive; 15VDC, 20mA max.
Current; 4~20mA/600Ω or 0~5mA/2kΩ
Servo drive output: Option
Dual output: Any combination from among relay, SSR drive and current output
Auto/Manual: Balance less bump less transfer
Output limiter: 0~100%
Direct/Reverse: Selectable, reverse in Dual output model
Cycle time: 1~120 sec., relay and SSR drive output
RUN/STOP: Controller enable/disabled
Preset manual: 0~100%, available when controller disabled
Alarm: 4 set point process variable or deviation alarm Alarm set point: Process variable alarm, 0~100% of range, deviation alarm, ± 100% of range Hysteresis: 0~100% adjustable within the range
Alarm on delay timer: 0~600 sec.
Nos. of output relays: 4 relays, driven from among each alarm and controller status (2 relays are optional)
Relay rating: a-contact, 250VAC 0.5A, resistive load, One side contact are common.
Status Output: AUTO/MAN, RUN/STOP, Watchdog timer & Reach at set point (available on set point ramping)
Digital input: 4 input for set point selection, PID parameter selection, AUTO/MAN switching, Remote/Local switching, or RUN/STOP switching, Non-voltage contact input 15VDC 1mA
Memory backup: Non-volatile RAM (Fe-RAM)
Interface: 300~9600 bps, ZE7101A0110 and ZE7101B0408 allow direct connection of RS-232C and RS-422A (RS-485)to the controller respectively
Power Supply: Voltage rating at 100 to 240VAC,50/60Hz
Power consumption: Approx. 6VA/100VAC, 10VA/200VAC
Weight: Approx. 450 g
Operating temperature range: -10 ~ 55°C

PERFORMANCE
Accuracy: ± (0.25% +1 digit) max., refer to Range Accuracy Table
Source impedance effects: Approx. 0.13µV/Ω at TC & mV ranges, RTD lead wire 5Ω max.
Input impedance: Approx.250Ω/4-20mA, Approx.500kΩ/Volt input
CMRR: 140dB min.
NMRR: 60dB min.

OPTION
Analog retransmission: 0 ~ 20mA or 4 ~ 20 mA selectable for process variable, set point or output, max.load 600Ω.
Accuracy: ± 0.25%, resolution 0.05%
Isolated remote set point: 1 ~ 5 VDC or 0 ~ 5VDC, Approx. 500kΩ input impedance
ARCNET : Token passing LAN, 2.5Mbps, 20 nodes/network, 255 nodes max.

DIMENSIONS
48x96x100 (Unit: mm)

PANEL CUTOUT
45+0.8x92+0.8 (Unit: mm)
TECHNICAL SUPPORT
VAASA (THAILAND) LIMITED
39/117 Moo 11, Srinakarin Rd., Bangkrew, Bangplee, Samutprakarn 10540 THAILAND
Tel: 662 753 6994
Fax: 662 753 6996
Hot-Line: 6681 935 2355
Email: vaasa@truemail.co.th
www: http://vaasathailand.blogspot.com/
©1991-2010 VAASA (THAILAND) LIMITED39/117 Moo 11, Srinakarin Road, Bangkrew, Bangplee, Samutprakarn 10540 THAILAND
Phone: 662 753 6994 • Fax: 662 753 6996 • Hot-Line: 6681 935 2355 •
Email : vaasa@truemail.co.th, www: http://vaasathailand.blogspot.com/

2010-07-22

RM25G /OHKURA /HYBRID RECORDER

Ohkura RM25G HYBRID RECORDER

FEATURES • Contact free feedback potentiometer and input selector
• Easy channel identical by mark printer
• Both Trend & Data logging printouts
• Universal inputs and ranges
• Dielectrics strength of 2000V between power input and ground
• Wide range of power input voltage
• Abandance of printout function
• Optional IC card
RM25G and RM25N are hybrid recorder allow digital printout on analog trend or pen traces on 250 mm. wide chart paper. The RM25G offers 360x288 DIN size panel and the RM25N replaces former model 25R recorder.

SPECIFICATIONS MODEL BASE INSTRUMENT
RM2506: 6 point recorder
RM2512: 12 point recorder
RM2524: 24 point recorder
RM2530: 30 point recorder

Number of inputs: 6,12,24,or 30 dot point.
Type of input ;
DC Voltage: 4mVDC min., 20VDC max.
Direct thermocouple: K, T, J, E, B, S, R, G, C, N, PR40-20, PLII, U, L, Au-Fe
RTD: Pt100Ω, Pt50Ω, JPt100Ω, Cu10Ω (at 0°C), Cu10Ω (at 25Ω)
Current: 4 ~ 20mA
Conductivity: 100µS/m ~ 2000mµS/m
Recording width: 250mm calibrated
Recording accuracy: ± 0.5% max.
Open input protection (option): Up scale with mV or TC input
Chart Speed: 6, 12, 24 & 30 point model; 1 ~ 1800mm/h
Chart paper: Fold chart standard, 23m long, 286mm width
Data print color: Purple (Red on alarm)
Dot print interval: 5sec. per channel.
Input sampling: 5sec. Per channel
Print head: Dot point models; 6 color ribbon cartridge and 5mark
Alarm: 6 Set points per channel
Alarm output (option): 2 relays drive per setting. Form-C 250VAC 3A /125VDC 0.5A /30VDC 3A max., Hysteresis 0.5 ± 0.2%, Setting accuracy ± 0.5%
Input impedance:10MΩ min. In mV/TC Input. 200kΩ min. In mV/TC Input with open input protection, 1MΩ min. In Volt Input and 100Ω min. In mA Input
Source impedance: 10kΩ max. in mV/TC input, 200Ω
max. in mV/TC Input with open input protection, 1kΩ
max. In Volt input and 10Ω max. per wire in RTD input.
CMRR: 140dB min. in 50/60 ± 0.5Hz
NMRR: 60dB min. in 50/60 ± 0.5Hz
Isolation resistance: Input/ground 500VDC, 20MΩ min.
Dielectric strength: Power supply voltage/ground 2000VAC, 1 minute duration. input/ground 500VAC, 1 minute duration
Power supply voltage: 85 ~ 264VAC, 45 ~ 65Hz ± 5%
Allowable instant power failure: 50ms max.
Power consumption: 70VA max.
Vibration resistance: 1m/s2 max., 10 ~ 60Hz
Shock resistance: 2m/s2 max.
Operating conditions: -5 ~ 50°C. 35 ~ 85%RH
Dimensions: RM25G; 360 x 288 x 340 mm. , RM25N; 406(w) x 325(h) x 340(d) mm
Weight: RM25G ;17.0 kg max. , RM25N ; 19.0 kg max.
Mounting: Panel mount
Allowable backward inclination : 30°
Material ;
Case : Steel plate
Door frame : Aluminum die casting
Color ;
Case : Metallic silver
Door frame : Black (Standard)
Maximum range & Accuracy:
The Junction compensation accuracy is not added to digital readout accuracy and recording accuracy.
The junction compensation accuracy is based on operating conditions :

Temperature: 23 ± 2°C

RH Humidity: 55 ± 10%

Power source: 85 ~ 264VAC

Warm up time: 30 minutes min.

Vibration: no effect of Vibration resistance and shock resistance.
Limit of compensation error: ± 1°C at R,S,B,PR40-20 ± 0.5°C at K,E,J,T,G,C,N

CONDUCTIVITY RECORDER
Sensor: Thermistor (2.5kΩ at 25°C, 400Ω at 25°C), Pt1000Ω at 0°C
Solution temperature compensation: Auto temp. compensator provided temp. Sensor by Thermistor for 5 ~ 45°C, Pt1000Ω for 0 ~ 100°C
Note 1: To be specified from 2.5kΩ
Note 2: Unavailable for purity water
Recording accuracy: ± 0.5% at 25°C
Temperature characteristics: ± 0.3% /10°C
Isolation resistance: Input/ground 200VDC, 20MΩ min., Other terminal than input/ground 500VDC, 20MΩ min.
Dielectric Strength: Input/ground 200VAC, 1 minute duration, power Input/ground 2000VAC. 1 minute duration
CNRR: 100dB min., in 50/60 ± 0.5Hz
Range and max. cable length :
Length described bellow is based under use of our exclusive 3-cored or 5-cored cable.
Model: 3-cored cable: IPS0245A1500 5-cored cable; WPSN040A000001A

STANDARD FUNCTION
Item Description
Analog indication : Process variable is indicated on a scale plate.
Recording : Printing with 5 marking by 6 color ribbon cartridge.
Engineering unit indication : Engineering unit is indicated on the scale plate.
Digital display : Indicates channel no., process variable, date, chart speed, alarm set point in the display 1 & 2.
Scaling : Indicates and prints process variable with set point.
Logging print : Prints each channel’s process variable, engineering unit on the chart paper. Printing mode is selected from analog recording, end mode for analog recording.
Date print : Prints year and date at a programmed time.
Time print : Prints time at a Programmed interval.
List print : Prints type of input, range, engineering unit. alarm set point, date. time, chart
speed. scaling and logging print status on the chart paper.
Skip : Abandon dot print of inputs as required by dot point models.
Programming : Chart speed, alarm set point. logging print interval, skip, date and time can be programmed.
Memory backup : Back-up for clock by lithium batteries for 10 years or 5 years in unused and for program by non-volatile memory.
Key lock : If you don't use key for more than 5 minutes in a user mode, the key would be
locked automatically.
Alarm : 6 set points alarm per channel.
Chart speed : 2 chart speeds can be programmed.
Time indicator : Indicates year, month, day, hour, minute. Adjust for leap year automatically
Self diagnostics : Indicates "ERROR", and outputs when CPU, printer. ADC are faulty.
Fail alarm : Outputs when faulty.
Common alarm : Outputs in alarming.

CONFIGURABLE FUNCTIONS
Function Description
Open input protection : Sets Indicator at over 100% or 0% per Inputs when input becomes open for TC or ±50mV max. Input.
Zone recording : Recording on the Chart track ranged per Inputs.
Alarm on print : When an alarm arises, alarm-on time, alarm-on channel, alarm setting number and alarm mode are printed in purple color.
Alarm recovery on print : When an alarm is recovered, the time of recovery, the recovered channel, alarm setting number, and alarm mode are printed in purple color.
Damping : Digital filtering for measured data (process variable) in unsteady process.
(Pen model only). Filter constant range ability: 1.0000 to 0.0001 Formula is: k=0.64/T,
k= Filter constant T1= 99.5% damping
Alarm hysteresis setting : Alarm hysteresis width can be set.

DI REMOTE OPTIONS
Function Description Chart start stop ; Close: starts , Open: stops
Change chart speed ; Close: 1st , speed Open: 2nd
Remote logging print : Close: starts to print
Alarm Board: 8 Relays

COMMUNICATION INTERFACE
Communication Interface: RS-232C, RS-422A, ARCNET

TECHNICAL SUPPORT

VAASA (THAILAND) LIMITED39/117 Moo 11, Srinakarin Rd., Bangkrew, Bangplee, Samutprakarn 10540

Tel: 662 753 6994

Fax: 662 753 6996

Hot-Line: 6681 935 2355

Email: vaasa@truemail.co.th

www: http://vaasathailand.blogspot.com

DOWNLOAD PDF SPECIFICATION
RM25G/25N HYBRID RECORDER : RM25G/RM25N HYBRID RECORDER

©1991-2010 VAASA (THAILAND) LIMITED39/117 Moo 11, Srinakarin Road, Bangkrew, Bangplee, Samutprakarn 10540 THAILANDPhone: 662 753 6994 • Fax: 662 753 6996 • Hot-Line: 6681 935 2355 • Email : vaasa@truemail.co.th